Sign in to follow this  
Followers 0
SheepyCakes

VuhDo not casting Ancestral Spirit

3 posts in this topic

I did a lot of searching before making this thread, but I couldn't find anyone with a similar problem. I've been using VuhDo for a number of years now, maybe even as far back as 2009, and I've never had an issue with the spells and panels doing what I configured them to do. I've never played a Restoration Shaman before (I was a priest for many years), but for some reason, whenever someone in my group dies, even though I have told VuhDo to resurrect people when I click on their panel in the group, it does nothing. I tried telling VuhDo to also target the person I'm casting on, even though I find that unnecessary and annoying, but that didn't help. I tried completely resetting the configuration, re-installing VuhDo entirely, disabling other add-ons, but nothing has worked.

 

For context, I'm also using ElvUI, but even after I disabled it, VuhDo still won't res anyone. Has anyone had any experience with this? The develop site offered no real help.

Share this post


Link to post
Share on other sites

Hello,

I can't say that I ever had a similar problem or heard about it being unsolvable. (I'm running both VuhDo and ElvUI guides thus aware to a lot of possible problems).

VuhDo and ElvUI are running with each other just fine so the next thing I would suggest you, move or delete your VuhDo and ElvUI folders from Addons folder, move or delete WTF folder (just move it to the desktop if you don't want to reconfigure everything after the test), delete Cache folder. Make a fresh download of VuhDo and ElvUI, use my profiles for both of them from this thread and let's see whether it will solve your problem.

Share this post


Link to post
Share on other sites

Try this:

/vuhdo opt -> Spells tab (bottom left) -> Misc page (right buttons) -> Smart Cast frame -> make sure Resurrection is checked

I had noticed that resurrect was not casting sometimes, but more importantly to me Cleanse was sometimes casting when I wanted to heal someone.  I would click a raid frame to cast Healing Surge, but end up casting Cleanse/Purify instead.  Not every time, but whenever the target had a debuff - and that wasted GCD could end up being a death.

Anyway, Rez smartcast option is in the same spot so I checked it while solving the Cleanse issue.  Haven't noticed another failed Rez since.

Edited by Arovah
correction

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Pandacho
      I'm creating this stand alone thread with my UI so it would be easier to maintain and update the strings here, rather than in two different guides that already grew too big for easy updates.
      My UI looks like this:

      All the frames except of the raid ones are ElvUI, raid frames are Vuhdo.
      The shaman hub in the middle is Sweetsour's Shaman Auras.
      ElvUI profile:
      Pastebin
       
      Please read carefully before importing VuhDo profiles:
      VuhDo profiles do not contain custom bouquets so to use my bouquets you will have to import them to VuhDo before importing my profile.
      If you will not import custom bouquets, you will get an error message about them missing.
      If you don't need my bouquets but only a general layout, you can choose other options instead of them in VuhDo configuration in game.
       
      Custom bouquets:
      Paladin Beacon
      Personal CDs
      Raid Cooldowns
      Single_targ_mitigation
       
      VuhDo profile Resto Shaman (20-man):
      Pastebin
      VuhDo profile Resto Shaman (5-man):
      Pastebin
      VuhDo Resto Shaman Key Layouts:
      Pastebin
       
      VuhDo profile Resto Druid (20-man):
      Pastebin
      VuhDo profile Resto Druid (5-man):
      Pastebin
      VuhDo Resto Druid Key Layouts:
      Pastebin
       
      UI video 5-man:
       
      UI video raid:
       
    • By stormcaster
      I will keep this brief as I know folks like to get to the point!
      We are a 7/7M 3/3H raid team looking to add one Resto Shaman or one Holy/Disc Priest to our core raid team. We are on the PVE server Uldum and have been raiding since Vanilla. We raid Tues and Thurs from 8-11 EST and Sunday from 7-11EST. Hit me up in game if this sounds like a match with what you are looking for and we can chat, look at logs, etc!
      Stormcaster#1629
       
    • By Aeikz
      Hey guys, had a sick lootday today... I ended up getting 3 upgrades having a hard time to decide which two to use.
       
      I've got:
      http://www.wowhead.com/item=139330/heightened-senses ilvl 880
      http://www.wowhead.com/item=137419/chrono-shard ilvl 880
      and http://www.wowhead.com/item=138222/vial-of-nightmare-fog ilvl 885

      I've read that Chrono Shard has weak procc chance, but the stats are as right as they get..

      But then again the procc heal from Nightmare is amazing.

      Any suggestions or calculations out there?

      Thanks!
    • By MissMoxie
      Hey all! I've been maining a resto driud for about three expansions and I'm loving Legion! I thought I was getting the hang of raid healing, stacking crit & haste instead of haste and mastery, unless I'm running Mythic +, but today I was completely blown out the water by a pug resto with 15 less ilvls than me. Looking at logs, it looks like he was relying heavily on Wildgrowth (while not going oom... witchcraft!). But I feel like I'm really missing something about my class here and was hoping you wonderful folks could look over my logs and tell me just what I'm doin' wrong:
      My Armory: http://us.battle.net/wow/en/character/proudmoore/Zingaraa/advanced
      Logs: https://www.warcraftlogs.com/reports/compare/qKghL8H1cNrfvjpJ/qKghL8H1cNrfvjpJ#fight=1,1&source=9,-2
       
      Any insight would be greatly appreciated.
       
      Additionally, random question, when you switch to cultivation & spring blossoms, is it worth it to also switch to gear thats more mastery & haste?
       
      Thanks in advance! <3
    • By Pandacho
      The guide and Profiles to import were updated for Legion.
      Patch 7.1 update: 
      Retrieval of unit facing and position in instances was disabled by Blizzard. That breaks AOE Advice, Clusters and out-of-range direction arrow - do not try to use them.
      Default custom debuffs will now always be added by spell ID - please consider a complete reset of your custom debuff settings.  This can be done under 'VuhDo Options > Tools > Reset > Buffs/HoTs > Custom Debuffs' but beware you will loose all previous custom debuff settings!
       
      VUHDO CONFIGURATION
      VuhDo is raid frame replacement that is specifically built for high level raid healing. All your healing spells or any other actions can be asserted to mouse clicks or mouseovers on those bars (Click-Heal).
      VuhDo is great for displaying all the raid information you need as a healer - Health Bars, Mana Bars, Debuffs, Range, Incoming Heals, Aggro, HoTs, Absorb Shields, Status Effects, Player Tags (afk, disconnected, dead).
      In addition:
      You can heal, decurse, target, assist or focus raid members with just one click. You can bind any usable item, command or macro to mouse clicks. You can assign up to 40 mouse click combinations to cast on raid members. You can assign any keys to cast when mouse over. You can automatically fire your trinkets and instant casts whenever cooldown is over. You can automatically resurrect players out of combat. You can easily keep track of all of your and raid buffs / debuffs. You can rebuff automatically chosing the most suitable spell and target. You can smart buff your raid automatically selecting missing buffs. Okay, let’s talk about configuration now.
      This is the mess that you get when you first install the addon. Many people just delete the addon straight away when seeing this, ignoring how amazing it is.

       
      STARTING OUT:
      If you are configuring the addon for the first time, it’s better to delete all the default frames that you've got on start:

      Click on addon icon near the minimap. Click on ‘Move!’ Click on every red X you’ll see until the only remained frame would be ‘VuhDo - BuffWatch’. The easiest and fastest way to start is to go to the ‘TOOLS’--> ‘Panel Wizard’ and to tick there the panels you want to have in your VuhDo configuration.
      It would be nice to have ‘Groups’ and ‘Main Tanks’ panels from the beginning.

      Click on ‘Tools’ Click on ‘Panel Wizard’ Tick ‘Groups’ and ‘Main Tanks’ Click ‘Apply’ After clicking ‘Okay’ in the popup menu you will see ‘Groups’ and ‘Main Tanks’ panels appearing. And then we’ll add an additional panel ‘Target’:

      Click on ‘Move!’
       
      MOVE!

      Click on ‘+’ in ‘Add New Panel.’ Click on ‘+’ on the new transparent panel that appears. You’ll now get a new panel as seen in Figure 3 in the above screenshot. Click on ‘Choose.’ Now you’ll get two downdrop menus: ‘Type’ and ‘Value.’ You can choose the ‘Type’ of panel you want - in our case it’s ‘Special’ for Targets (players and NPCs). In the ‘Value’ downdrop menu choose the ‘Target’ Many nice things to play with -  you can add a menu for Pets, Vehicles, Focus, different raid roles, etc..! There is a nice update to Special panels: NPCs panel.
      Very helpful in raids where you have to focus heal or dps specific NPCs units. No more tabbing, clicking or looking around ^^
      To add NPC panel go to Move!->Add new Panel->Type: Special->Value:NPCs

       
      Here's how it looks in the raid:

      You can build Raid frames manually too if you don’t want to use the Panel Wizard: just choose in the ‘Type’ of panel ‘Group’ type. Click the ‘+’ button on the first panel that you created to add an additional 5 man groups to it. Voila, Panel 1 becomes your 10-40 man raid frames (every ‘+’ will add a 5 man group to the frame). You have to use the same Panel for the Raid Groups so they will move together as one object.

      Now check “20” and hold the button “Test”. You will see some virtual raid and even real target, if you’ll click on somebody. It is a very useful feature for checking the results of your frames tuning.

       
      GENERAL

      Go to the ‘General’ tab. Tick ‘Main Tanks’ and ‘5 man MTs’, so VuhDo will automatically move Tanks to the ‘Tank’ panel. *You don’t have to do this or add the ‘Main Tanks’ panel if you don’t want to see the tanks in a separate panel from the raid
      Adjust everything else according to personal taste.
       
      INDICATORS (more nice options for tracking):
      You can play with a loads of possibilities here. I personally use 3 of them - Inner frame for the Paladin Beacons, Special DoT for the Role Icon and Treat Marks to track the current aggro target (very useful if you need to know when the tanks are swapping).
      Clicking on ‘More...’ button near every tracker allows you to change size and color of the icon.

       
      SPELLS
      Here you can bind you spells, actions or macros to any button of your mouse and keyboard.

      Go to Spells→ Mouse→ Modifier Key → None Open up your spellbook and drag your primary healing spells to the ‘Mouse Key’ Left and Right Buttons and to the ‘Mouse Wheel’ Up and Down sections. Note that the Mouse Wheel section will only work when it’s mouseovering your VuhDo frames. If you scroll outside of the frames, you will zoom in and out of the screen. You can assign more spells / commands / macros to Modifier Key → Shift, Modifier Key → Ctrl and so on. All your mouseover macros will work perfectly with VuhDo frames  
      PANELS
      On the ‘Panels’ tab, make sure that General→ Ordering → Alignment → Horizontal is ticked. It’s much easier to move your mouse in the left-right directions rather than up and down. Chose ‘Grouped’ and ‘Hide Empty’ in Ordering, so you will always see your actual groups in the raid. Better to leave ‘Sort by...’ with ‘Unit ID’ but if you prefer some other sorting it’s up to you. Do not forget to press ‘Apply All’ to apply your changes to all the groups (and not just to the current one)

       
      On the ‘Panels’ tab, click on the ‘Sizing’ option on the right hand side. For Bar Height, choose something like 37-40 to make the bars taller. Spacing and gaps as you like.
       
      BARS
      On the ‘Panels’ tab, select the ‘Bars’ option on the right hand side. Decrease the Mana bar height to 3 - you really don’t need it any bigger than this. You can play around with the rest of the options here.

       
      HEADERS
      On the ‘Panels’ tab, click on the ‘Headers’ option on the right hand side. Tick ‘Show’ on Headers if you want to see panels names (Group 1, Group 2, target, etc.). Untick ‘Class Color’ on Header Text if it was ticked by default. TEXT
      On the ‘Panels’ tab, click on the ‘Text’ option on the right hand side. Tick ‘Class Col.’ on Bar Text so you will see player’s nickname in his class color. Hitpoints → Show → Percent. Show Text → Name & Flags (untick ‘class’ and ‘pet owner’ if it was ticked by default. You can play around with the rest of the options (text size, color, position) here.
      HOT ICONS
      On the ‘Panels’ tab, click on the ‘HoT Icons’ option on the right hand side. In the ‘Own HoTs’ section, choose one of 2 masters that shows where your HoTs will appear and use the buttons below to view your HoTs as ‘Icons’ and ‘Text.’ In the ‘HoT Order’ section, you can assign any of your or other players HoTs, Absorbs, Shields, Procs, personal and Raid CDs to any of the 6 spots shown in the ‘Own HoTs’ diagram. You should always leave Slot 7 (the middle slot) for the ‘AoE Advice’ icon. Or not...
      Another nice option here - to change the HoT icons size.
      Click on the button “More” from the right side of HoTs positioning masters and adjust.

       
      BOUQUETS
      You maybe noticed some options in the HoT Order section that are shown on my screenshot but couldn’t be find in your options. They are the Bouquets: custom groups of Buffs / Debuffs / HoTs / CDs that could be created by a player himself.
      Let’s create a custom bouquet for example for tracking of Tank personal CDs in your raid where the tanks are Warrior and Paladin.

      Go to General→ Bouquets. Type a name for a new Bouquet and press ‘New’ Press ‘Add’ button it the Bouquet Details part Type a spell name in the ‘...or enter Buff / Debuff / HoT name’ line In ‘Select default icon’ dropdown menu always chose ‘None / Default’, otherwise you wouldn't see the appropriate icon. Add all the spells you would like to track in your ‘My tanks’ bouquet. There will be situations when you’ll have multiple CDs or HoTs that were popped simultaneously to track. Because all the spell icons from one bouquet are shown in the same place, you should use the Priority Arrows to assign the importance of every one of them (e.g. the highest priority will be shown first).
      Another possibility to work with bouquets is just to edit the defaults.
      For example, we can chose a default ‘Raid Cooldowns’ bouquet and remove, add or change priority of CDs based on our raid composition.

      After creating or editing a bouquet you can use it in the HoT icons assignments.

       
      BUFFS
      As you've may have noticed, VuhDo has a separate Buff frame as part of the package. Personally, I don’t believe there is any need for VuhDo to show your buffs. I use WeakAuras to trace my mandatory buffs (on myself and others) and you should have something similar. So, I advise that you go to the ‘Buffs’ tab → General → Uncheck ‘Enable.’ If you want to play with it later - feel free to do so.
       
      DEBUFFS
      Extremely useful in raids. You can see most of the debuffs by default in your healing frames, but sometimes the addon is not updated yet for a new raid zone or the authors wouldn’t add some debuff that you want to trace. In this section you can add or remove any debuff / buff / proc that is applicable to a player.

      Go to Debuffs→ Custom Type buff / debuff  Spell ID in the line (you can find Spell ID on Wowhead in the address line. For example: “http://www.wowhead.com/spell=642/divine-shield”- Spell ID for the Divine Shield is 642). Now it will appear in the (de)Buff list. Tick the appropriate positions if you want to see stacks or timers for the debuff. Tick 'Bar Color' if you want to see a specific debuff in some different from the default color and pick the color from palette. Click ‘Save’ Do not click ‘Apply all’ or you’ll rewrite the defaults of all the debuffs.
      If you want to remove some buff / debuff / proc from the list, choose it from the dropdown menu and click ‘Delete’.
      There is an option for a complete reset of your custom debuff settings.  This can be done under 'VuhDo Options > Tools > Reset > Buffs/HoTs > Custom Debuffs' but beware you will loose all the debuff settings you customized.
       
      PROFILES
      If you ever wanted to save your VuhDo configuration for more than one toon / spec / raid size / encounter type or to share what you have with other VuhDo users, this is the place for you.
      Saving profiles for different specs / toons:
      Go to VuhDo Options->Tools Tab->Profiles.

      On the left side in 'Profiles' part you will see a line '...or enter profile name' with some name already typed in. Change it to a name that will make you remember what exactly you are saving here. I normally use a toon name with encounter type or a toon name with a group size, but if you are going to store profiles for different specs, it may be a good idea to mention a spec too.
      I stopped on profile naming in such a details because the default name is a bit weird - it's just made of a chain of nicknames for every toon you ever saved this profile for, so after having 2-4 toons in the chain it almost impossible to understand what exactly is stored there.
       
      Type a new name for your profile and press 'Save' Button. Do not confuse 'Save' with 'Apply' or you will cancel all the changes you made.
      After saving a profile, you can choose in the central part of the Tab the activation type: by group size and / or by spec. You will be able to choose it only after profile is saved, so don't be surprised if you are not able to check anything there.
      If you want to make this profile a default for all the new characters on the account, check 'Default Profile' button.
      Loading and deleting a profile:
      If you don't want VuhDo to activate profiles for you automatically or you want to load some specific profile for a new toon, go to the 'Select a profile' dropdown menu, choose whatever you need from there and hit 'Apply'.
      To delete a profile, choose it from the same dropdown menu and hit 'Delete'.
      Settings:
      Two useful buttons: 'Quiet mode' allows you to get rid of Confirmation Dialog spam, 'Lock' prevents an accidental overwriting of a profile.
      Key Layouts:
      An important note: Spell assignments are not saved in Profiles. To save, load or delete Spell and HoTs assignments you should go to Tools->Key Layouts:

      Export and share profiles:
      You can export selected features, share or receive profiles from other VuhDo users.
      To be able to receive a profile you have to go to 'Tools->Share->Receive Data' and tick 'Enable'.
      To share a profile you should click on a button 'Share' in the 'Send Profile' area. A new window will pop up: a dropdown menu with a line where you can type specific player's name and server. The dropdown menu will show your online guildies and people you are in group / raid with (disregarding of them having or not having VuhDo).

       
      Here's an example of my VuhDo profiles:
      I made a UI screenshot with opened talent tree and VuhDo HoT assignments.
      Key Layouts (how I assign spells to mouse): remember they are configured separately from the main setup and you have to import them separately too in Tools->Key Layouts->Import

      In 5-man HoT icons I track only my HoTs because obviously there are no other healers. Threat and personal CDs people may use are being tracked through Indicators (General->Advanced->Indicators). In this bouquet everyone should add his group specifics if you are aiming for Mythic+: I found a bit redundant to keep there damage mitigation abilities for all the classes.
      Regarding the Hot Keys you see on the screen - it may be a bit confusing because I don't really use all of them but:
      1,2,3 - dps abilities
      = - Tranq
      F1 - Barkskin
      F2 - Dash
      F4 - Inner
      F - Efflorescence
      G - shapeshift
      Q - Artifact spell
      D - Ironbark mouseover macro
      J - Cenarion Ward mouseover macro
      E,H - interrupts
      T - Flourish
       
      The raid setup:
      I'm raiding Mythic so my healing frames are tuned for 20-man.

      As you can see, HoT icon section changed - now I track what other healers are doing too so we wouldn't overlap with the healing and I'm be sure that assigned damage mitigation spells are used.
      The actual strings to import are in this separate thread because it's technically problematic to update them here in guide.
       
      I have to say that there are loads of options that I didn’t speak about here. But I tried to keep it short and basic.
      I always can answer any of your questions about VuhDo or you can continue to dig it by yourselves.