1 post in this topic
Recently Browsing 0 members
No registered users viewing this page.
So, lately I have been looking around the web for someone to explain how I can insert an icon/bar that displays the "buff" Feral Spirit. I am mainly using the Tell Me When addon, but I had to go through Weak Auras this time to get it right. I also want to mention that I would not have been able to get it right had I not imported the Weak Auras string from Wordup (author of the enhancement shaman guide). The reason for this being so complicated is because contrary to what you might think, Feral Spirit does not work as a buff. Therefore you will have to manually work around this problem to get it to work. I have added some pictures that will hopefully make the process easier.
PS. I am in no way an expert on either Tell Me When or Weak Auras, so be gentle...
1) Tell Me When:
This is the general layout. If you dont want an icon, but a bar. You can go into the "group" tab (bottom right of tell me when) and select bar (on the very top)
This is how the layout inside Tell Me When should look after completion. Feral Spirit is no longer a "buff", so you will have to make a Combat Event where you manually enter the amount of seconds the combat event (Feral Spirit) should be active, in this case 15 seconds
This is important: Events to check --> Casts --> Spell Cast Success
After all that you should be ready to go!
2) Weak Auras:
Feral Spirit is no longer a "buff", so you will have to make a Combat Log where you manually enter the amount of seconds the combat event (Feral Spirit) should be active, in this case 15 seconds
Just scrolling down
All the way at the bottom you have to enter the Spell Name and the amount of seconds that the Combat Event (Feral Spirit) should be active.
Now you should be all ready to go!
The guide was updated for Legion.
Profile to import is here.
ElvUI is a full UI replacement. It completely replaces the default Blizzard UI at every level with a new and better interface. It has multiple addons and plug-ins integrated into it, such as Dominos action bars and TidyPlates. As such, you’ll only ever have to update ElvUI and not worry too much about its individual components. This UI will arrange your interface to be more flexible and practical.
DOWNLOADING AND INSTALLATION
Download ElvUI from Tukui. The version on Curse is outdated.
Following the above link, you will find two addons to download: Tukui and ElvUI. You need ElvUI:
Unpack the downloaded archive to your WoW Addons folder (World of Warcraft -> Interface -> Addons)
If you had ElvUI previously installed, you'd get a message asking to replace the current folder - click 'Yes':
Log in to WoW. Click the 'AddOns' button in the left bottom corner of your character selection screen. Make sure that both ElvUI Config and ElvUI are enabled in the addons list:
Press 'Enter World'. ElvUI config can be reached from the Main Menu (in game press Esc button-> press ElvUI button) or by typing /ec in chat.
When entering the game for the first time after installing the addon, you'll get this screen :
If you can't see this Installation screen, type /ec in chat and then press 'Install' button in the config window:
You’ll now have a 8 step configuration process. Do not skip it if you don’t have ElvUI already configured on some other toon.
 Click on ‘Continue’ to begin:
 Step 2 of 8: CVars: Click on ‘Setup CVars’ → ‘Continue’
 Step 3 of 8: Chat: Click on ‘Setup Chat’ → ‘Continue’
 Step 4 of 8: Theme Setup: you can try all 3 buttons (Classic/Dark/Class) to see the difference and click ‘Continue’ after you decided.
 Step 5 of 8: Resolution: choose ‘High Resolution’ if you have a 15 inch + monitor, otherwise choose ‘Low Resolution’ → ‘Continue’
 Step 6 of 8: Layout: Choose the option you are interested in - a player / target / target of target Unit Frames will be at the bottom of the screen, not on the top and in a slightly different position for every role (You can click on every role to see the difference and to choose what you like better). If you chose a Healer role, you will get an announcement asking you to install the Clique addon, just click ‘Yes’ and ignore it, no need to install anything.
Click ‘Continue’ when you’re done.
 Step 7 of 8: Auras: I would advice for ‘Icons Only’ - we don’t need a million bars and timers for standard raid buffs. We all know that they are present. But you can select the ‘Aura Bars&Icons’ option too if it’s you taste. Click ‘Continue’ when you’re done.
 Step 8 of 8: Installation Complete: You’re done with the basic installation, hit the ‘Finished’ button and it will reload your UI.
After restarting, you’ll get a screen with a support announcement and tips. Check “Disable”, then press “Hide” if you don’t want these tooltips to come up. I suggest not to hide them until you’re completely familiar with ElvUI.
Now we’re going to configure your UI a bit more.
Typing /ec in chat will open the Config window.
There are some very nice options here that make your life easier:
- ‘Announce Interrupts’ dropdown menu. Set this to ‘None’ if you are using some other addon for it or set to any of the other options: Party/Raid/Say, etc.
- Select an ‘Auto Repair’ option from the drop down menu.
- Tick ‘Vendor Grays’ - awesome option!
- Tick “Auto Greed/DE’ to automate rolling on greens. It’ll automatically choose Disenchant or Greed (depending on whether an enchanter is available or not). This option works only on max level so don’t be afraid to DE something useful.
- You can disable the Order Hall Command Bar from here too.
- In the Objective Frame tab you can change its length.
Go through the rest of options and check whatever you feel useful.
Before Legion it was a dropdown menu that was changed recently to a stand alone config window:
While a 'World Map' tab is pretty obvious, you should configure properly the Minimap section:
- Pay close attention to the Minimap Buttons menu (Garrison / Calendar / Mail / LFR Queue, etc) - you can resize, move, hide / hide in combat all the buttons.
You should pay attention to the ‘Hide’ button. For some reason it is ticked by default so you’ll have to untick it for every button you want to see on your Minimap.
Same as Maps, it was a dropdown menu in General tab and was changed recently to a stand alone config window:
If you are still leveling or grinding Faction Reputations, you can configure here
- XP Bar & Reputation
You can choose here all the standard options - move, resize, vertical / horizontal, show on mouseover.
Tick 'Hide at Max level' for the XP bar - it's a nice option.
A very useful in Legion - it shows gained/needed for the next trait AP for your currently equipped Artifact and open the Traits window on mouse click.
Go through the rest of options and check whatever you feel useful.
- Tick ‘Enabled’
- Tick ‘Keybind Text’. Displays bind names on the action buttons.
- Tick ‘Macro Text’. Displays macro name on the action button so you'll be aware that pressing this button you'll run a macro and not a single ability.
- Change ‘Font’ and ‘Font Size’ to whatever works for you.
‘Pick Up Action Key’ is the button that you must hold down in order to drag an ability to another action button - prevents from accidental messing with the buttons.
Now check “Enabled” for Micro Bar (this is the one with Quests, LFR, Char Info, Spellbook, etc icons), any of the Bars 1-6, Pet Bar and Stance Bar. Actually, you can enable only Bar 1 and 2 or whatever works for you and disable all the rest.
For every bar, there is a ‘Mouse over’ tick box - this will simply hide the bar until you mouseover it, which is useful for bars that are irrelevant during raids.
In enabled Bars, you can choose the number of buttons per bar and vertical or horizontal style.
- The ‘Buttons’ slider will allow you to set how many buttons a bar will have (the button cap is 12 though, you cannot have more than that in a single bar).
- ‘Buttons Per Row’ - choose 12 if you want a horizontal bar, choose 1, if you want it vertical bar.
Actually you don’t have to have exactly 12 buttons per bar. It can be any amount from 1 to 12 or even 2 rows of 6 buttons or any other configuration that you prefer.
If you want to hide an Action Bar in a specific situation, for example during a raid, you have to type
[vehicleui] hide; [overridebar] hide; [petbattle] hide; [nocombat] hide; show;
in the 'Visibility State' window.
Now we will sort the bars on the screen. Click ‘Toggle Anchors:’
You will then get this screen:
Just mouse drag your bars to the proper position.
If you feel that your bars are stick to something all the time, just untick ‘Sticky Frames’ option in the central Menu.
In addition, you get a 'Nudge' menu with arrows and numbers on every bar you are clicking - you can use it for fine tuning (if you are interested in extremely precise positioning ^^)
When you’re done, click on ‘Lock’ in the central Menu.
To configure Hot Keys on your Action Bars, click on ‘Keybind Mode.’
You will get this window pop-up:
Tick Character specific Key Bindings only if you want different positioning of hotkeys on the bars for different characters. You’ll get an explanation of what to do on the screen. Do not forget to click ‘Save’ when you’re done.
Click ‘Enable,’ if you want to use ElvUI’s bag system. It’s nice, tidy and flexible in size and positioning. If you have an external bag addon, you will have to disable ElvUI’s bag system or you’ll get both of them messed up.
I personally preferred to disable ElvUI bag system and use AdiBags addon. It’s the same graphic style but has very good smart section division by default including different gear sets - no need to configure anything. In addition you can have all the Currencies you want to track at the bottom line.
Looks like this:
BUFFS AND DEBUFFS
Both ‘Enable’ and ‘Disabled Blizzard’ must be checked.
You can play here with the options or leave it untouched, move and resize chat windows, remove / split existing or add new, add timestamps, enable chat history, etc.
Let’s try to add a new chat window, so you’ll know how to do this.
 Right click on the ‘General’ tab of your Chat window and select ‘Create New Window’ from the menu.
 Name this window ‘Raid.’
 Right-click on the newly created ‘Raid’ chat window and select ‘Settings.’
 From the ‘Chat’ category, untick everything except ‘Party, Party Leader, Raid, Raid Leader, Raid Warning, Instance, Instance Leader.’
 From the ‘Global Channels’ category, untick everything.
 Click ‘Okay.’
Remember that you can move chat windows - you will have to untick ‘Lock Positions’ option to do this.
Datatexts are all the additional data that could be displayed at the bottom of chat windows, Action Bars and Minimap.
You can also interact with the datatexts. For example, clicking on Time will bring up Calendar, on Durability - your Character Info, on Spec - will change it to the secondary, mouseover on System - shows your addon list with the memory used, etc.
There is a nice tab 'Currencies' where you may configure which currencies and in what format you want to see in Datatexts.
Frankly, there are a million possibilities to try :)
If you are using external addon for the Nameplates, you’ll have to untick “Enable” here.
Check “Enable” in tabs you want Nameplates on (I personally check only Enemy NPC but it's completely your choice):
There are a lot of options to track and to choose from but they are all very user friendly so I wouldn't explain them one by one.
Pay Attention that the Elite Icon was finally added to ElvUI so you don't need to write custom texts to track Rare and Elite mobs anymore.
SKINS / TOOLTIPS / FILTERS
Doesn’t matter. Do whatever you want here.
Enable only the UNIT FRAMES tabs that are relevant for you. All the rest - keep them disabled.
You should disable all the Blizzard frames - keeping both Blizz and ElvUI frames creates unnecessary mess on your screen.
For example as a raid healer I disable all the party/raid frames because I’m using VuhDo for it.
You can use Clique and mouseover macros with ElvUI Unit Frames.
ElvUI Raid Frames are very flexible: you can move and resize them, choose vertical or horizontal positioning. Any target data, buffs and debuffs could be configured separately for every kind of group. You can add and remove targets of your target, focus or pet, their cast bars, name, HP, level, raid icons, etc.
If you are interested in tracking incoming heals or threat, there are options for this too.
The most awesome thing about ElvUI is that after you did it once, no need to configure the addon for every character. Just choose the toon or a named profile that you want to copy the settings from. If you have a viable offspec, you can also ‘Enable Dual Profile’ to configure it.
Or you can just save different profiles for 10-man / 25-man raid or for tank / dps spec.
Another nice option is to share your profile with other player (obviously they should have ElvUI too) when targeting them.
I'm sharing my profile here for those who prefer not to start from scratch.
Use 'Import Profile' button to import :)
Since im doing lots of mythic+ it includes lots of checking in wowprogress. And since many players are too lazy to send their wowprogress.com link, I am stuck with typing in their name. Usually no problem, but...
there are a lot of players with weird symbols in their name or russians (kyrillic) etc.. Before this patch the addon PRAT worked fine for me since it has a button to copy the chat into a new window and use the copied words for third party tools (easy checking).
But now in 7.3 PRAT does not work good anymore and the copy button does not work at all.
Anyone knows how I can get a solution to my problem?
I need some help figuring out my rogues weak auras.
I currently have this: https://gyazo.com/e9f6967a7c2e56fdb4a88f9c554ebd22
What I want to happen is that when there are 3 seconds remaining on for ex rupture, the icon of rupture glows and once rupture is gone the icon just stays there glowing.
Secondly, could someone give me the ID for the envenom buff as I cannot seem to track it whatever I do. Hopefully in the same format as the others in the picture above.
Can anyone help me with this by guiding me on how to do it or giving me the string on the new one?
Thanks in advance.
So i'm currently looking for an addon which shows the poison uptime on the enemy nameplate. I'm currently using KuiNameplates, but by default it only shows the uptime on me bleeds, and it gets quite annoying looking at the enemy unit frame for Surge of Toxins. Is there any way to add it to the display, or does anyone know of an nameplate addon which shows poison uptime on the nameplate along with bleeds?
I thank you all beforehand for all help.